top of page

NEOLAB DELTA

Deep Soil Preparation

Neolab works the soil deep soil preparation for better farming agriculture equipment soil preparation

NEOLAB is intended to replace the plough and to decompact with a V-mounted or in-line chassis and a clearance under the frame of 800 mm. 

NEOLAB works the soil without turning with "Michel" tines, bolt or non-stop hydraulic safety devices, up to .50m. The working widths vary from 2.50 to 4m.

NEOLAB can be fitted with corrugated double disc rollers, notched disc rollers or square bar rollers.

WIDTH

Number of Tines

4

2M50

4M

3M

6

8

Basic Information

  • Tubular Frame 140mm x 10 mm in V

  • 3 point anti-rotation pin linkage between yokes No. 2/3

  • Clearance under frame 800 mm

  • "Michel" patented tines, safety bolt or non-stop hydraulic

  • Pitch between tines: 500mm (745 at the centre) except for 4 tines, 660 mm (980 at the centre)

  • Interchangeable points and ploughshares. (Carbide optional)

  • Power required per tine: 20 HP

  • Signalling as an option

The Blades:

safety shears release the tine ploughing

"Michel" tine with pre-sheared safety bolt to release the tine if the stress is too high.

Mihel NSH blade non-stop hydraulic fitted.

"Michel" NSH blade, non-stop hydraulic fitted, allowing the blade to retract before the obstacle and move back into position automatically.

Rear Equipment

8 square bar, 25 mm, roller, diameter 445.

Corrugated disc double roller

diameter 510, 125 mm patch

Notched disc roller diameter 620,

225 mm patch.

Honeycomb disc diameter 600,

pitch 230 mm.

​

Options

3 point linkage for corrugated

disc double roller - diameter 510

Corrugated disc double roller

510 with 3m or 4m chassis

Unit counter on corrugated disc

double roller - diameter 510

Pair of depth control wheels

10-ply tires - diameter 550 x 175

Clod fender for corrugated disc double roller - diameter 510

(2.50 m x 11, 3m x 12, 4m x 16)

Pushed linkage with pair of

swivel wheels.

Carrie Strong Points

Safety

  • shearing of a bolt if force on the time is too high

  • pin adjustment for the tine clearance

  • on NSH model: the NSH system allows the tine to retract before the obstacle and resume its position automatically by means of a hydraulic cylinder.

Durability

  • solid frame, entirely welded, including the coupling and the time holders, no risk of play.

  • 3 point anti-rotation pin numbers 2 and 3

  • coupling yoke thickness 20 mm.

Efficiency

  • uniform work over the full width of the tool without turning and almost without movement.

  • avoids the plough pan

  • breaks up the soil, promotes drainage, improved rooting of the plants.

  • maintains organic matter on the surface

  • requires little power because of the vibrations obtained from the original shape of the blades.

Comfort

  • bolts are pre-sheared, they are sheared cleanly and are easy to change

  • 2 spare bolts supplied with the equipment

  • adjustment of rollers by pins on multiple position sector, simplicity and speed of adjustment.

  • conversion of the 3m chassis to 4m possible

  • on NSH model the dynamics of the NSH tine make it possible to retain a minimum frame overhang in combination.

Quality

  • control at each stage of production

  • paint with polyurethane finish on epoxy finish

  • surface treatment before painting by conversion

  • final control before shipping, may be consulted on request.

Environment

  • enables the organic composition of the soil to be preserved by an action without destructuring.

  • reduced surface area, which inhibits water run-off and the action of the wind

  • cracking promotes water penetration into the soil, thus limiting erosion.

NEOLAB ECO

Deep Soil Preparation

NEOLAB ECO is a subsoiler that is aimed to replace ploughing and decompacting in Delta BC Canada.

4

NEOLAB is intended to replace the plough and to decompact with a V-mounted or in-line chassis and a clearance under the frame of 800 mm.

NEOLAB works the soil without turning with "Michel" tines, bolt or non-stop hydraulic safety devices, up to .50m. The working widths vary from 2.50 to 4 m.

NEOLAB can be fitted with corrugated double disc rollers, notched disc rollers or square bar rollers.

NEOLAB ECO can also be combined with a harrow or a seed drill.

WIDTH

3m

Number of Tines

4M

4M

3M

3M

6 et 8

8

4 et 6

6

4

Basic Information

  • Tubular Frame 180mm x 10 mm in-line

  • 3 point anti-rotation pin linkage between yokes No. 2/3

  • Clearance under frame 900 mm

  • "Michel" patented tines, safety bolt or non-stop hydraulic

  • Pitch between tines: NE model 500mm (745 at the centre)  et HE model: 525 mm (644 at the centre)

  • Interchangeable point and ploughshares (carbide optional)

  • Pair of stands

  • Power required per line: 20 HP

  • The run for the power take-off makes it possible to couple to it motorist tools of non-motorised tools, in combination with a seed drill.

  • Signalling is an option.

​

​

The Blades:

"Michel" tine with pre-sheared safety bolt to release the tine if the stress is too high.

"Michel" NSH blade, non-stop hydraulic fitted, allowing the blade to retract before the obstacle and move back into position automatically.

8 square bar, 25 mm, roller, diameter 445.

Corrugated disc double roller

diameter 510, 125 mm patch

Notched disc roller diameter 620,

225 mm patch.

Honeycomb disc diameter 600,

pitch 230 mm.

​

3m

Rear Equipment

Pair of depth control wheels

10-ply tires - diameter 550 x 175

Unit counter on corrugated disc

double roller - diameter 510

Corrugated disc double roller

510 with 3m or 4m chassis

3 point linkage for corrugated

disc double roller - diameter 510

Options

Pushed linkage with pair of

swivel wheels.

Clod fender for corrugated disc double roller - diameter 510

(2.50 m x 11, 3m x 12, 4m x 16)

Pair of lateral deflectors, 

NEOLAB ECO

3 point mechanical rear linkage, spacing No 2/3 ball joint No.2 or 3 for NEOLAB ECO.

3 point hydraulic rear linkage, spacing No 2/3 ball joint No.2 or 3 for NEOLAB ECO.

NEOLAB TWIN

Deep Soil Preparation

Deep soil plughing culivating farming equipment

NEOLAB TWIN is designed to replace ploughing and for decompacting soil with a chassis capable of taking various configurations of blade assembly.

NEOLAB TWIN works with the soil without turning it over with "Michel" safety bolt blades up to 0.30 m. Working widths vary from 2.50m to 3m fixed and from 4m to 5m folding.

NEOLAB TWIN may be fitted with various types of rear equipment.

The Blades:

Basic Information

Fixed Chassis

  • Entirely welding single piece frame.

  • Assembly in two rows, beam centre distance: 900 mm on rectangular tube 140 x 80 x 8 

  • 3-point coupling between yokes No.3 - Pins No 2/3 anti-rotation.

  • 4 possible configurations for a single frame

  • 2 blade models to choose from

  • Pitch between ploughshares: 250 mm

  • Clearance under chassis: 825mm with 700 blade                                                                    725mm with 600 blade

  • Signalling and lighting as an option.

Technical characteristics NEOLOAB Twin fixed

Working Width

Number of Blades

Folding Chassis

  • Entirely welded single piece frame on rectangular            tube 200x100x8

  • Assembly in 2 rows, beam centre distance:                                 900mm on rectangular tube 140x80x8

  • 3-point coupling between yokes No.3/4 anti-rotation.

  • 4 possible configurations for a single frame

  • 2 blade models to choose from

  • Pitch between ploughshares: 250 mm

  • Clearance under chassis: 825mm with 700 blade                                                                    725mm with 600 blade

  • Hydraulic folding at 3m in 2 parts, 2 double effect cylinders

  • Hydraulic locking of the extension for transport and work.

  • Signalling and lighting as an option.

Technical characteristics NEOLOAB Twin Folding

  • "Michel" 600 or 700 blade with pre-sheared shaft to release the blade if there is significant stress.

  • Offset of tips by 125mm to improve soil flow.

  • Positioning of blade flanges by welded pin to prevent any risk of sliding on the beam.

  • Possibly of carbide ploughshare and counter-blade for particularly abrasive soils.

Rear Equipment

Retractable comb harrow, diameter 16 on 1 bar + 8 square bar roller 25mm, diameter 445.

Undulating disc double roller,

diameter 510, 125mm pitch.

Working Width

Number of Blades

Number of Blades

Semloc Equipment

  • Crop planning by broadcast sowing (surface)

  • Pneumatic distribution with hydraulic blowers

  • Centralized application rate provided by radar

  • Variable oriface regulatory from 8 to 100 kg/ha

  • 200 to 400 litre capacity

Single honeycombed disc roller diameter 600, 230mm pitch + retractable comb harrow diameter 10 in 1 bar.

Single honeycombed disc roller diameter 600, 230mm pitch.

Retractable comb harrow diameter 16 on 1 bar + single honeycombed disc roller. Diameter 600, 230mm pitch.

Options

Unit counter on double undulating disc roller diameter 510.

Disc scrapper for double undulating disc

Pair of tyred wheels diameter 535 x 168 10 ply.

bottom of page